- Identify and remove commercial motor vehicles with critical vehicle inspection violation items identified in the North American Standard Out-of-Service Criteria from roadways.
- Conduct inspections and identify and acknowledge commercial motor vehicles that do not have critical vehicle inspection violations by affixing those vehicles with a CVSA decal.
- Encourage proactive vehicle maintenance in advance of the week.
- Highlight the hard work and commitment to safety by inspectors, drivers and motor carriers.
- Remind drivers and motor carriers about the importance of proper brake maintenance and vehicle pre-trip and post-trip inspections.
- Provide an opportunity for outreach and educational brake-safety efforts by inspectors.
- During the brake portion of a vehicle inspection, inspectors will look for missing, non-functioning, loose, contaminated or cracked parts on the brake system, and non-manufactured holes (such as rust holes and holes created by rubbing or friction) and broken springs in the spring brake housing section of the parking brake. They will listen for audible air leaks around brake components and lines, and ensure the air system maintains air pressure between 90-100 psi (620-690 kPa). Inspectors will also check for S-cam flip-over and measure pushrod travel. They will check that slack adjusters are the same length (from center of S-cam to center of clevis pin) and the air chambers on each axle are the same size. They will also inspect required brake-system warning devices, such as ABS malfunction lamp(s) and low air-pressure warning devices. In addition, inspectors will ensure the breakaway system is operable on the trailer, and inspect the tractor protection system, including the bleed-back system on the trailer.
TAG – Data-encoded RFID tags are placed in each inspection zone of a vehicle or asset. In a commercial trucking environment, for example, tags are placed in inspection zones that adhere to DOT compliance requirements for pre- and post-trip inspections. Many school districts place tags at the back of a bus to ensure that drivers perform their end-of-shift check for students.
INSPECT – The individual performing the inspection must physically scan each tag on the vehicle. The tablet device must be within two inches of the point of inspection, which helps to verify that a check was performed and the vehicle is up to operating standards. EVIR acts as an electronic, verifiable log to prove that inspections are being performed accurately and consistently.
24-HOURS | 7-DAYS A WEEK EMERGENCY ROAD SERVICE
WHO WE ARE
A&T "Mobile" Heavy Duty Truck and Trailer Road Service is a 24-hour, 7-days a week roadside mobile truck repair service for light and medium-duty to heavy duty commercial trucks and trailers. At A&T "Mobile" Truck Road Service we like to think of ourselves as the "Ambulance Service for Trucks." If your truck is broken down, we will come to you and perform the necessary triage to get you back on the road. Now includes towing, load adjustments, and more. Not only do we provide 24 Hour Emergency service, we could come out and do light mechanical work on site to our customer's fleet and avoid the truck having to come in the shop.
North Bay Truck Center and A&T Road Service heavy duty towing.We think this is the most flexible and useful rig to tow the biggest trucks on the road, along with big buses, and large RV units.
Our normal service area covers the best part of the bay area and Sacramento region; however, we now have capability to tow across the country if needed. Our A&T Road Service has expanded so much that we had to add towing to make it even more effective and timely.
When you need a tow, Call 1-800-434-1205
The first models and designs for automobiles were created in the 15th century by none other than Leonardo da Vinci, and the state of the global auto industry has evolved significantly since. First steam, to electric, gasoline, and today’s hybrids, the evolution of safety features in cars plays an essential role in reducing the once overwhelming number of injuries and damages resulting from auto accidents. Auto manufacturers have come a long way over the history of auto safety, paving the way for improved global safety standards.
Unfortunately, as a vehicle ages, a number of factors come into play that reduce the automobiles safety, aside from mechanical wear and tear. According to statistics, a driver is 10 times as likely to suffer fatal injuries in a collision while operating a 30-year-old vehicle versus a late model. The auto industry is continually working to improve the safety of current mechanisms, as well as developing and testing new ideas for safer vehicles. Developments in driving technology and new types of airbags have been prevalent just this year.
While the ultimate safe vehicle may be a long way off, American auto manufacturers have made significant strides in improving the overall security and protection a vehicles structure provides. Over the past 3 decades, fatal accidents in the U.S. have decreased by more than 1/5, a substantial decrease demonstrating immense progress in terms of the safety features in cars.
The need to revolutionize auto safety was not fully realized until the 1950s, when the first usable airbags were developed, among other safety mechanisms. Then, in 1970, the National Highway Traffic Safety Administration (NHTSA) was created. The organization still uses the same name today, and continues its role in promoting and effectively executing driving safety regulations throughout the U.S. Whether creating new policies or revising existing regulations (at the state and federal level), the NHTSA and the United States have been true catalysts in the history of car safety.